Related Links

  • ETI
  • Elsevier Ltd is not responsible for the content of external websites.

News

ETI project: 90 m offshore wind turbine blades

The UK Energy Technologies Institute (ETI) has announced a project to develop wind turbine blades over 90 m long for the next generation offshore wind turbines.

By Renewable Energy Focus staff

The wind turbine blades would be used for offshore wind turbines with a capacity of 8-10 MW. Currently, offshore wind turbine blades are typically 40-60 m long.

Energy and Climate Change Secretary Chris Huhne, says: “Groundbreaking innovation is needed today to help create a low carbon future. This is why I’m pleased the ETI is asking inventors to come up with the wind turbines of tomorrow. Improving turbine performance will increase output and drive down costs, making it more economical to generate green energy. I am confident that business, industry and our best research brains take up the challenge.”

Dr David Clarke, ETI Chief Executive, adds: “This project is based on our earlier studies which identified that the most cost-effective size for a horizontal axis turbine is likely to be between 8 and 10 MW with significantly larger blades than scaling up current turbines would typically give.

“Along with improved system reliability, the impact of larger blades is a crucial factor in helping to bring down the costs of generating electricity by offshore wind which is why we are now seeking partners to develop and demonstrate these large-scale high performance blades.”

Clarke continues: “Investing in this project to develop much larger, more efficient blades is a key step for the whole industry in paving the way for more efficient turbines, which will in turn help bring the costs of generating electricity down.”

“Creating very long blades with the right stiffness and aerodynamic performance whilst maintaining an acceptable cost is going to be a huge challenge for the industry and is going to need the best design and manufacturing team we can assemble. The UK has world leading capabilities in advanced manufacturing and we expect to see the most competitive teams involved.”

The ETI expects to invest around £10 million in the project.

Share this article

More services

 

This article is featured in:
Wind energy

 

Comments

Lftrsuk said

17 May 2011
At £8750/kW and 34% capacity factor, about 30 of these (+ CCGT backup) are needed to reliably supply 100 MW, at a cost of £260,000,000. Installation, oversized (under-utilised) grid connection must take it over £½ billion. And ETI are investing £10 million of our taxes - are they mad?

Dear Mr. David Clarke,

Why don't you spend valuable tax payers money on the first-of-a-kind 100 MWe Liquid Fluoride Thorium Reactor (LFTR)? It should cost around £300 million and thereafter, factory made, production-line LFTRs should cost around £150 million each.

If you want to do the UK's technology base any good and create manufacturing jobs, growth and prosperity, not seen in the UK for 2 generations, get a lot of your resources into promoting LFTRs.

Note: The majority of comments posted are created by members of the public. The views expressed are theirs and unless specifically stated are not those Elsevier Ltd. We are not responsible for any content posted by members of the public or content of any third party sites that are accessible through this site. Any links to third party websites from this website do not amount to any endorsement of that site by the Elsevier Ltd and any use of that site by you is at your own risk. For further information, please refer to our Terms & Conditions.

Comment on this article

You must be registered and logged in to leave a comment about this article.