- 05 June 2008 -
Scott Bader's materials in subsea structures

SCOTT BADER is supplying products including their gelcoats and Crystic® 703PA polyester resin to Sörkomp of Norway for the production of glass-reinforced plastic (GRP) subsea structures.

Scott Bader’s Crystic 703PA is a pre-accelerated, dicyclopentadiene (DCPD) polyester resin with low viscosity and controlled exotherm characteristics. It is approved by the Lloyds Register of Shipping for marine applications, and is suitable for vacuum injection and similar production techniques in large structures.

“Their [Scott Bader’s] special Crystic 703PA DCPD infusion resin has given us big advantages for the fast production of very thick laminates up to 60 mm, allowing us controlled geltime and low exotherm combined with very quick cure and productivity,” says Jon Inge Brattekaas, General Manager at Sörkomp.

The GRP covers for the subsea structures have been designed to provide impact protection to pipeline connection points from surface dropped objects such as drill pipes. Pipeline expansion zones, usually an area of Z-shaped pipe work, are also protected. The covers provide overall protection to seabed installations against commercial trawling operations.

They are around 24 mm thick – enough to withstand dropped-object impact forces of 50 kN. In heavier structures up to 30 tonnes, thicker laminate of up to 80 mm are incorporated as lifting points. Compared to similar structures of steel, GRP has the advantage of having only a third of the weight and being corrosion resistant at the same time as keeping impact strength.

The mouldings are given an outer surface yellow gelcoat finish after the vacuum injection process to ensure maximum visibility for seabed conditions, before a final top gelcoat finish is applied. The coloured gelcoat is Scott Bader’s Crystic 0209 SMK which is isophtalic with low styrene content and good self levelling properties. The final topcast is the Crystic X 103 KH, a pre-accelerated orthophtalic gelcoat with a tack-free surface. Both are thixotropic polyester gelcoats.

More than 80 large covers for the production of undersea oil and gas pipelines equipment have recently been manufactured. Total GRP gross weight is 430 tonnes, and some covers weigh up to 10 tonnes each. The majority of the products have been supplied to Acergy Norway AS for the Tyrihans project.

Scott Bader; www.scottbader.com

<<back

To receive news and features like this every week direct to your inbox sign-up for RP Weekly.

Simply register your details to receive this free email roundup of the latest from the composites industry.

If you would like to advertise on RP Weekly please contact our sales team.

If you have some news for the composites industry or would like to comment on any of the articles on this site, contact our editorial team.

You can also access the full list of contacts here.